Worthington Distribution Knowledge Base

Setting up a Logenex Teleport Door Station for an IP phone system (SIP Server)

Products included:

Teleport Door Station (i.e. TP-202XVC)

Teleport Door Controller (i.e. TPC )

SIP Server (i.e. GrandStream UCM6102)


Information needed:

IP address of the SIP server

Extension number for the Door Controller

SIP password for the extension

Ring Group or Extension number the Door Station will call

4+ digit number to be entered to unlock the door (if applicable)



  1. Download he search program to find the Door Controller on the network
    1. http://logenex.com/productpdf/TELEPORT/TP_search.exe
  2. Run TP_search.exe
  3. Enter the IP address found in the previous step in your internet browser:
    1. At this point you should see an image from the camera
    2. If no image appears, verify that you have the video plug-in for your browser
  4. Select “Configuration” and login to the Door Controller
    1. Login: Admin
    2. Pass: Admin


From the menu options on the left select

  1. Basic Settings
    1. Set your time zone and the controller time
    2. “Save” before leaving screen
  2. SIP
    1. Enter Under SIP Settings
      1. Account Name For reference only, any name
      2. SIP Server IP Address from GrandStream
      3. Outbound Proxy IP Address from GrandStream
      4. SIP User ID Extension Number of Door Station
      5. Authenticate ID Extension Number of Door Station
      6. Authenticate Password Password entered in SIP server
      7. <Skip Tp>
      8. Local SIP Port port of SIP server
      9. Local RTP Port port of SIP server
      10. “SAVE”
    2. Enter Under SIP Open Door Settings ( if applicable)
      1. Enable SIP Open Door check Yes
      2. Key to Open Door 4+ Digit Code to open door
      3. Delay Lock Time (second) 5
      4. “SAVE”
    3. Enter Under Phone List
      1. Phone List Ring Group Number/Extension
      2. Remark Name For reference only, any name
      3. “ADD”

Reboot the System…

From the Menus Select

  1. Advance Settings
    1. Maintenance
      1. Restart


Attached Files
There are no attachments for this article.
There are no comments for this article. Be the first to post a comment.
Security Code Security Code
Related Articles RSS Feed
Setting Grandstream Extension Numbers to 3-digit
Viewed 31771 times since Thu, May 19, 2016
Distinctive Ring for small Grandstream system.
Viewed 5637 times since Thu, Jun 1, 2017
Using One Grandstream System with Two Businesses
Viewed 5287 times since Fri, Jun 2, 2017
Stopping Phantom calls on an IP phone system
Viewed 7408 times since Mon, Nov 21, 2016
EverFocus AHD Cameras on Older DVRs
Viewed 5343 times since Tue, Apr 19, 2016
Set-Up of a Basic Grandstream Phone System
Viewed 60612 times since Thu, Jul 6, 2017
Programming a Leviton Door Station to operate on a SIP server.
Viewed 5454 times since Fri, Jun 24, 2016
"Live Video" Snapshots from Leviton INDS1 on Snaplink or OmniTouch7
Viewed 4590 times since Fri, Jun 23, 2017