Replacing Draper Intelliflex Gen2 Products with ESI

Introduction:

Draper’s newer Intelliflex Gen3 products are not compatible with their Gen2 series. This can cause problems if you need to make changes to an existing system. All is not lost, though – ESI’s RP and RQ devices are directly compatible with Draper’s Intelliflex Gen2 products. This article will provide a list of direct ESI equivalents to the majority of Draper’s Intelliflex Gen2 devices.

Requirements:

Varies, see the chart below

Procedure:

Find the Draper product name or SKU in the table below to find the ESI equivalent in the last column.

Draper Product Name	Draper SKU	ESI/Worthington Part Number
SC1 Controller	C156.065	ESIRQ60AUMH115
ISO Relay	C157.012	ESIISO
GC4 Controller	C156.058	ESIISO4B
SGC4 Controller	C156.059	ESIISO4B with ESIRQ60AUMH115
SPGC4 Controller	C156.060	ESICUSTOMPANEL1 with (4) ESIRQ60AUMH115*
Switch for Sun Sensor	C112.103	ESIDSKS/W
Sun Sensor	C156.057	ESILTSENINTV2
Network Communicator	C103.062	ESISENALS100
R2D7 for serial control	C156.066	ESIR2D7
USB to DB9 Adapter	C103.049	ESIUSBSERIALADA
Serial Port Adapter	C103.042	ESIRS232ADAPTOR
Dry contact Converter	C112.086	ESIPSIB
Intelliflex Keypads	varies	ESIK1ST through ESIK24ST
Intelliflex IR Remotes	varies	ESIT1-5000, ESIT5-5000, or ESIT1S through ESIT24S
Intelliflex RF Receiver	C081.017	ESIRR433
Intelliflex RF Keypads	varies	ESIK1STRF433 through ESIK24STRF433
Intelliflex RF Remotes	varies	ESIT1SDUAL433 through ESIT24SDUAL433

Results:

You should now have the ESI part number you’ll need to order from Worthington Distribution.

Replacing Draper Intelliflex Gen2 Products with ESI

Subscribe to Knowledge Base